Description
About the Cultural Stone MOUNT LEUSER Arena:
Product description : Mount Leuser Arena culture stone is much lighter than real stones and is more affordable in terms of cost and workmanship, 50-year limited product warranty, long-term color preservation, hot-cold heat insulation, it is It is a decorative stone wall covering and wall decoration product which is preferred in many areas because of the acoustic appearance of your office decoration, bedroom decoration, fireplace and chimneys.
Culture Stone Features:
The weight of 1 square meter varies between 20 and 25 kilograms. Pumice (bims) sand it contains; It provides sound insulation and heat insulation. Since Mount Leuser Arena Culture Stone is not flammable or flammable, it is safe to use in all your living spaces. It has zero harm to human health. Thanks to the high strength cement in its structure, the culture stones are extremely resistant to external forces. The thickness of the culture stones varies between 1 cm and 2.5 cm depending on the texture. Due to the thickness, there is almost no loss of space for decoration.
Note: There are specially produced cornerstones for each Culture Stone model.
Materials needed:
Trowel, joint trowel, lath or whisk rope, plastic joint surplus, joint pump or course bag, spiral stone engine, container for mixing mortar (mortar boat - wheelbarrow - mortar bucket)
Surface Preparation Before Applying Culture Stone
*** Culture stone; It can be applied to almost any surface with solid (rigid) surfaces such as reinforced concrete curtain, rough construction, column, beam, perforated concrete, filled brick, ytong (aerated concrete). If there are situations that will adversely affect the adhesion process such as more than one coat of paint, moisture, pieces of insulation material, dirt, oil, dust, swelling, friable plaster residues on the surface, they should be eliminated. In large surfaces, the walls should be scraped or the floor should be made ready for application by re-plastering. Drywall surfaces should be applied with joint tape or plaster with mesh.
* If the wall to be applied is damp, the wall body and surfaces must be dried.
Protection of Walls During Application
*** During the application of decorative culture stones and especially after the application, especially in order for the joint adhesive used on the first day to gain sufficient strength by interacting, it should be protected from liquids such as rain water, construction waste water, excessive heat, exposure to excessive sunlight, extreme cold and frost. It is recommended to cover the application with canvas type nylon cover with a gap between the culture stone.
Stable Weather Conditions, Cleaning and Other Matters Needing Attention During the Application of Decorative Culture Stone:
*** Cultural stone application should not be made at +4 degrees Celsius.
*** The application of cultured stone, which is planned to be made in the cold winter season, should be done 1 or 2 days after the joint filling process, as the time of gaining strength of the adhesive will extend in frosts. Since the joints will remain open during this process, the decorative wall covering should be protected by covering it with canvas or nylon derivative covers to protect the surface from precipitation and cold.
*** In the application of culture stone in hot weather in summer, considering that the glue may dry quickly and lose its strength, the stones to be walled should be moistened. (Practically, it is sufficient to immerse the stones in a container full of clean water before applying.)
*** Due to the difference in the structure of the soil during the firing of the cultural stones, the color tones of the stones may differ slightly. During the application of decorative stone wall cladding and culture stone, in order to prevent tonal differences, covering stones should be taken from different boxes and mixed application should be made by considering the color harmony.
*** During the application, care should be taken not to contaminate the adhesive mortar and filling material on the stone panel surface.
Decorative Culture Stone Application and Joint Options:
* When material gets on the surface of the stone panel, the contaminated material should be allowed to dry and the plastic should be cleaned with a hard brush or wire brush after it dries.
* For very dirty surfaces, special composition DekorArt Surface Cleaner should be used.
* After the application, materials such as paint, varnish, vinegar, salt spirit etc. should not be applied on the stone surface.
Certified master teams recommended for Decorative Culture Stone applications should be worked with.
Certified master teams recommended for Decorative Culture Stone applications should be worked with.
How to Apply Culture Stone?
* The surface is prepared according to the above principles.
* The adhesive material is prepared in accordance with the usage conditions.
* The adhesive is applied to the surface with a 8-10 mm notched trowel.
* Handmade culture stone is stuck to the surface with a 1 cm joint with the help of metal lath, rope, plastic joint surplus or wedge by applying some special DekorArt Stone Adhesive on the back.
* While knitting, care is taken to ensure that the horizontal and vertical joints are in balance and plumb line.
* After the adhesive has dried (24 hours), laths should be removed and joint filling should be started.
* The joint to be used for handmade culture stones can be applied with a minimum width of 10 mm by choosing the special DekorArt Joint Filler.
* The grout should be applied with the help of a grout gun without smearing the stone surface.
* When the grout dries to a level that it does not stick to the hand, it should be shaped with the help of a joint trowel.
Reviews
There are no reviews yet.